Health Monitoring & Daily Care

Ergonomic Kneeling Chair with Back Support

Ergonomic Kneeling Chair with Back Support

$297.00
$297.00
Free shipping on orders over $50 Sold out

forest Solid-Wood Frame

height Height-Adjustable

local_shipping Ship within 24 hours

A forward-tilted seat, a cushioned knee rest, and a fixed backrest sit on one height-adjustable frame. The seat carries less of your weight than it would in a standard chair, because the knee rest and backrest are built to take on the rest of it.

 
View full details

A different seat angle, not a softer chair.

A standard chair seats you at roughly 90 degrees between your thighs and your torso. Kneeling-chair designs pitch the seat forward instead, so the angle opens up rather than closing — the knee rest takes on the weight your thighs would otherwise carry, and the backrest is there for when you want to sit upright without any kneeling weight at all.

This isn't a new concept. The kneeling chair traces back to the "Balans" chairs designed in 1970s Norway, most associated with designer Peter Opsvik, which drew on physician A. C. Mandal's research into seated posture and hip angle. This chair follows that same basic geometry: a forward-tilted seat pan set at roughly 15°, paired with a knee rest and backrest on one adjustable frame.

Construction Details

Every part earns a place in the frame.
01
Forward-Tilted Seat Pan
Pitched forward at roughly 15°, rather than sitting flat like a standard chair seat.
02
Cushioned Knee Rest
Foam-and-linen pad that carries part of your weight instead of leaving all of it on the seat.
03
Fixed Backrest
A stationary panel for upright sitting with no kneeling weight involved.
04
Height-Adjustable Frame
Adjusts across 3–4 height settings spanning about 18–22 inches at the seat, to fit different users and desk heights.
05
Linen Seat and Knee Pad, Foam Fill
Both contact surfaces are upholstered the same way, since both carry real weight in this design.
06
Solid Wood Frame
Load-bearing joints are doweled and mortise-and-tenon, rather than welded like a metal frame.
Close-up of the blade meeting a tablet in the bed
How it works

Setup and Use

01
Set the surface Place the chair on a stable, level floor before adjusting anything.
02
Set the height Adjust the frame until the seat and knee rest line up with your body and your desk.
03
Sit and center Lower onto the seat with your knees resting on the pad, not the edge of it.
04
Lean when needed Use the backrest for upright sitting without any kneeling weight.
05
Shift and stand Change position through the day, and stand up during longer stretches of work.
TIP
The most common adjustment mistake is sitting down before setting the frame height. Level the seat and knee rest with your desk first — then sit.

Full Spec Sheet

Model / SKU
AHH-EKC-001
Frame Material
Solid Wood
Seat & Knee Upholstery
Linen
Fill Material
Foam
Color / Finish
Linen With Back
Style
Modern, Solid Pattern, Armless, Straight Leg
Assembled Dimensions
28"D x 22"W x 21"H
Seat Depth
22 in
Item Weight
9.91 kg (21.8 lb)
Maximum Weight Capacity
120 kg (265 lb)
Assembly Required
Minimal — attach the knee rest and backrest with the included hardware, then adjust the frame height
Care Instructions
Spot clean linen with a mild detergent and water; avoid saturating the foam fill; wipe the wood frame with a dry or slightly damp clothIncludes1 × Ergonomic Kneeling Chair with Back Support
Includes
1 × Ergonomic Kneeling Chair with Back Support
Material Rationale

Why wood and linen, specifically

Solid wood was chosen over a welded metal-tube frame because the load path in a kneeling chair runs through the seat-to-frame joint at a forward angle, not straight down as it does in a standard four-leg chair. That joint is built with doweled and mortise-and-tenon joinery, made to hold under angled load rather than straight-down weight.

Linen with a foam fill was used at both the seat and the knee rest, rather than just the seat, because this design puts sustained pressure on the knees as well — leaving that pad thin or unpadded would just move the pressure point instead of removing it.

22 in
Seat depth, sized for full thigh contact at a forward-tilted angle
9.91 kg
Total weight: light enough to reposition, heavy enough to stay planted while kneeling
60-Day Money-Back Guarantee
Not satisfied? Full refund, no questions asked.
Free Shipping on Orders Over $50
Dispatched within 24 hours of your order.
Ordered
Confirmation email in minutes
Order Ready
Packed and dispatched within 24 hrs
Delivered
Tracked to your door

Questions before you buy

Does it require assembly?

Minimal — attach the knee rest and backrest with the included hardware, then adjust the frame height to fit your desk.

What's the maximum weight the chair supports?

Up to 120 kg (265 lb).

What are the seat and knee rest made from?

Both are upholstered in linen over a foam fill, mounted on a solid wood frame.

How do I clean it?

Spot clean the linen with a mild detergent and water, and wipe the wood frame with a dry or slightly damp cloth.

What are the dimensions once it's set up?

Assembled, it measures 28"D x 22"W x 21"H, with a 22-inch seat depth.

Built to be adjusted, not just assembled.

One frame, three points of support, sized to real dimensions.

60-day money-back guarantee · Free shipping over $50 · Ships within 24 hrs